$28,Automotive , Replacement Parts , Shocks, Struts Suspension,Kit,Bar,End,KIPA,Odyssey,Sway,Link,2005,Bar,Stabilizer,Front,vdeltaedu.com,/midway648139.html,for $28,Automotive , Replacement Parts , Shocks, Struts Suspension,Kit,Bar,End,KIPA,Odyssey,Sway,Link,2005,Bar,Stabilizer,Front,vdeltaedu.com,/midway648139.html,for KIPA Front Sway Bar Stabilizer End Credence 2005 Kit Odyssey Link for $28 KIPA Front Sway Bar Stabilizer Bar End Link Kit for Odyssey 2005 Automotive Replacement Parts Shocks, Struts Suspension $28 KIPA Front Sway Bar Stabilizer Bar End Link Kit for Odyssey 2005 Automotive Replacement Parts Shocks, Struts Suspension KIPA Front Sway Bar Stabilizer End Credence 2005 Kit Odyssey Link for

KIPA Front Sway Bar Stabilizer Excellent End Credence 2005 Kit Odyssey Link for

KIPA Front Sway Bar Stabilizer Bar End Link Kit for Odyssey 2005

$28

KIPA Front Sway Bar Stabilizer Bar End Link Kit for Odyssey 2005

|||

Product Description

  • 1. Loosen the wheel lug nuts. Loosen them slightly, but do not remove
  • 2. Jack up/lift the car. You will need to jack the car by placing the jack under the suspension arm so it compresses the suspension and relieves the tension on the link.
  • 3. Remove the lug nuts and the wheel.
  • 4. Identify the bad link
  • 5. Remove the nut holding the sway bar link to the sway bar
  • 6. Install the new link. Simple insert the lower part first, then the upper. Be sure it is installed the same as the original - the bushings are touching the sway bar - from the top: nut, metal washer, bushing, sway bar, bushing, metal washer. The lower link is simply nut, mounting point, smaller nut.
  • 7. Tighten the nuts. When tightening the nuts, again you will need to use a socket wrench on the bottom on the larger nut, regular wrench on the smaller nut. Be sure to use the correct sizes so they do not strip/become damaged. On the top, a socket wrench and vice grips so the shaft does not spin
  • 8. Compress the bushings about half. The bottom part should be tightened so the two nuts are against both sides of the mounting point so it has no free-play
  • 9. Replace the wheel and lug nut. Do this after everything is tightened on the link, make sure you have all your tools.

KIPA Front Sway Bar Stabilizer Bar End Link Kit for Odyssey 2005